Tasmota Firmware Sonoff Basic MQTT Schalter

Y6-AM73-CKCV

New product

Sonoff Basic MQTT Schalter mit Tasmota Firmware

More details

16,99 € tax incl.

More info

Der Sonoff Basic hat sich als preiswertes und gutes Produkt für die Heimautomatisierung bewährt. Als Ergänzung für die bestehende Elektroinstallation ermöglicht es die Einbindung von z.B. Deckenlampen und Ventilatoren in das eigene Netzwerk. Möchte man das Produkt in die bestehende Smart-Home-Landschaft integrieren, stößt man schnell auf die alternative quelloffene Firmware Tasmota. Diese funktioniert ohne externe Server und ohne zusätzliche App und erlaubt das zuverlässige Schalten lokal in ihrem Heimnetzwerk. Das Installieren dieser Firmware haben wir hier für Sie schon übernommen: Sie können direkt mit dem Schalten loslegen, es ist keine extra Hardware oder kompliziertes Flashen notwendig. 

Weitere Vorteile der Tasmota Firmware:

- mehr Privatsphäre: Ihre Daten werden nur im Heimnetz übertragen und nicht an Dritte weitergeleitet
- als MQTT-Client verwendbar und damit in smarte Szenen integrierbar
- einfaches Verbinden ins Heimnetz per WPS

Specifications

- Voltage: 90-250V (50/60Hz)
- Maximum current: 10A
- Maximum watt: 2200W
- WIFI standared: 802.11b/g/n
- WIFI security: WPA-PSK/WPA2-PSK
- Software: Tasmota
- Color: White
- Size: 88*38*23 mm

Faqs

    What is Sonoff-Tasmota?

    Sonoff-Tasmota is an aternative open source firmware for ESP8266 based devices such as iTead SonoffAllterco Shelly and many, many more.

    It provides local control, MQTT and integration with home automation systems such as openHAB, Home Assistant and Domoticz.

    You may find more information on the official GitHub page

    If you are starting out and wish to have a relatively easy experience in developing your projects, then try the build-in web interface.

    4 Channel Switch

    Example of Tasmota Web Interface
    the Sonoff 4 Channel Pro MQTT Switch


    Initial configuration of the Sonoff-Tasmota devices
    1. Power up the sonoff device. The device will create a WIFI access point with the name sonoff-xxx, where xxx is some number
    2. On your computer, change your wifi network to sonoff-xxxx and browse to http://192.168.4.1
    3. Enter the details of your WIFI network and click save.
    4. The device will restart and get an IP address from your the DHCP server of your network.
    5. On your computer, change your wifi network back to your wifi network
    6. Use the Tasmota Device Locator or your router to find the IP address of the device.
    7. Browse to the IP address of the RF bridge.
    8. Go into "Configuration"
    9. Go into "Configure Module"
    10. Select Module Type, according to note below and press "Save". Now the RF Bridge is configured as such.
    11. To get to the main menu of the RF Bridge, browse to the IP address of the RF bridge.
    12. In "Configuration" it is now possible to specify MQTT and other parameters

    Note: Values for configuration of module type

    • RF Switch: Sonoff RF 2
    • Temperature/Humidity monitor: Sonoff TH 4
    • Power Monitor: Sonoff Pow 6
    • S20 Smart switch: Sonoff S2x 8
    • RF Bridge: Sonoff Bridge 25

    For the temperature/humidity monitor, you also need to specify the sensor type, e.g. AM2301.


    How do I configure MQTT with a Tasmota device?

    You use the Tasmota WEB UI for configuration. Enable MQTT in "Configuration/Other" and then specify your setup in "Configuration/MQTT".

    For more details see also https://github.com/arendst/Sonoff-Tasmota/wiki/MQTT


    How do I configure a Tasmota devices with Home Assistant

    There is a description of the integration with Home Assistant on the Tasmota site.

    DrZzz has made some tutorials, which may be helpful (but skip the parts about flashing Tasmota).

    General setup for tasmota is described at https://www.youtube.com/watch?v=c2IUIUnxjUY&t=859s

    For the RF Bridge there are some more specific instructions at https://www.youtube.com/watch?v=Ega4U1KRlso


    hello, I got your sonoff basic with tasmota. How can I rest it to factory defaults ? thank you Nicola

    Hi

    On delivery it is already in factory reset state.

    If you want to factory reset afterwords, check this link Tasmota Button Usage

    Long press

    When held continuously for 40 seconds (Configurable with SetOption32, value is 10x the configured hold time) Tasmota will reset to firmware defaults and restart.