Need Help?

Initial configuration of the RF 433MHz to WIFI Bridge


  1. Power up the RF Bridge. The RF Bridge will create a WIFI access point with the name sonoff-xxx, where xxx is some number
  2. On your computer, change your wifi network to sonoff-xxxx and browse to http://192.168.4.1
  3. Enter the details of your WIFI network and click save.
  4. The RF Bridge will restart and get an IP address from your networks DHCP server.
  5. On your computer, change your wifi network back to your wifi network
  6. Browse to the IP address of the RF bridge
  7. Go into "Configuration"
  8. Go into "Configure Module"
  9. Select Module Type "Sonoff Bridge 25" and press "Save". Now the RF Bridge is configured as such.
  10. To get to the main menu of the RF Bridge, browse to the IP address of the RF bridge.
  11. In "Configuration" it is now possible to specify MQTT and other parameters