Sonoff RF 433Mhz y MQTT Interruptor con Tasmota firmware

SW-H2ZN-8GY8

New product

19,99 € tax incl.

More info

Si quieres integrar el producto en el paisaje existente de Smart Home, podrás encontrar rápidamente el firmware Tasmota.
Funciona sin un servidor externo y sin una aplicación adicional y permite la conmutación fiable localmente en su red doméstica.
La aplicación EveLink no es compatible

Especificaciones

- Entrada: 90-264v AC (50 / 60Hz) / 5-24v DC
- La carga más grande: 10A
- Potencia máxima: 2200W
- Radio soportada: 433MHz RF
- Admite código fijo
- No soporta aprender código rodante y código dinámico
- Frecuencia inalámbrica: WiFi 2.4GHz(No soporta 5 GHz)

- Temperatura de funcionamiento (recomendado): 0ºC-40ºC
- Humedad de funcionamiento: 5% -90% HR, sin condensación
- Certificado CE / FCC / RoHS

Accessories

Faqs

    What is Sonoff-Tasmota?

    Sonoff-Tasmota is an lternative open source firmware for ESP8266 based devices such as iTead SonoffAllterco Shelly and many, many more.

    It provides local control, new features and easy integration with home automation systems.

    You may find more information on github


    Initial configuration of the RF 433MHz to WIFI Bridge
    1. Power up the RF Bridge. The RF Bridge will create a WIFI access point with the name sonoff-xxx, where xxx is some number
    2. On your computer, change your wifi network to sonoff-xxxx and browse to http://192.168.4.1
    3. Enter the details of your WIFI network and click save.
    4. The RF Bridge will restart and get an IP address from your networks DHCP server.
    5. On your computer, change your wifi network back to your wifi network
    6. Browse to the IP address of the RF bridge
    7. Go into "Configuration"
    8. Go into "Configure Module"
    9. Select Module Type "Sonoff Bridge 25" and press "Save". Now the RF Bridge is configured as such.
    10. To get to the main menu of the RF Bridge, browse to the IP address of the RF bridge.
    11. In "Configuration" it is now possible to specify MQTT and other parameters


    How do I configure MQTT with a Tasmota device?

    You may try the following links for more details on setting up a Tasmota device with MQTT:


    How do I configure a Tasmota devices with Home Assistant