Tasmota MQTT WIFI RGB+White LED Bombilla E27 7W

8436586380212

New product

Tasmota MQTT WIFI RGB+White LED Bombilla E27 7W

More details

Warning: Last items in stock!

26,99 € tax incl.

More info

The bulb is programmed with Tasmota firmware and shall be configured as the AiLight device.

The main protocol for control is MQTT.

In the WEB UI it is possible to toggle the light on/off. To specify colors and brightness MQTT is required.

It is compatible with many Smart Home solutions such as openhab, home assistant, and domoticz.

Specifications

- Socket: E27
- Voltage: 110-240V
- Watt: 7
- Lumen: 580
- Color Temperature: Multicolor RGB+W
- Dimmable: Yes
- Material: Aluminum+plastic
- Light Angle: 180°
- Life time: 30000hours
- Size: 62*120 mm
- Wifi: 2.4 GHz
- Certification: CE, FCC, ROHS

Faqs

    What is Sonoff-Tasmota?

    Sonoff-Tasmota is an lternative open source firmware for ESP8266 based devices such as iTead SonoffAllterco Shelly and many, many more.

    It provides local control, new features and easy integration with home automation systems.

    You may find more information on github


    Initial configuration of the RF 433MHz to WIFI Bridge
    1. Power up the RF Bridge. The RF Bridge will create a WIFI access point with the name sonoff-xxx, where xxx is some number
    2. On your computer, change your wifi network to sonoff-xxxx and browse to http://192.168.4.1
    3. Enter the details of your WIFI network and click save.
    4. The RF Bridge will restart and get an IP address from your networks DHCP server.
    5. On your computer, change your wifi network back to your wifi network
    6. Browse to the IP address of the RF bridge
    7. Go into "Configuration"
    8. Go into "Configure Module"
    9. Select Module Type "Sonoff Bridge 25" and press "Save". Now the RF Bridge is configured as such.
    10. To get to the main menu of the RF Bridge, browse to the IP address of the RF bridge.
    11. In "Configuration" it is now possible to specify MQTT and other parameters


    How do I configure MQTT with a Tasmota device?

    You may try the following links for more details on setting up a Tasmota device with MQTT:


    How do I configure a Tasmota devices with Home Assistant

    How to install and test the Tastmota Smart Bulb

    The Smart Bulb is compatible with the "AiLight" 27 module.

    The installation is done as for any other Tasmota device. However you need to be extremely careful when setting up the Wifi network, since there are no button to do a factory reset. Wrong SSID or password and the bulb is bricked!

    For installation follow the standard procedure.