Tasmota firmware Sonoff Basic MQTT Interruptor


New product

Sonoff Basic MQTT Interruptor con Tasmota firmware

More details

16,99 € tax incl.

More info

La aplicación EveLink no es compatible.


- Voltage: 90-250V (50/60Hz)
- Maximum current: 10A
- Maximum watt: 2200W
- WIFI standared: 802.11b/g/n
- WIFI security: WPA-PSK/WPA2-PSK
- Software: Tasmota
- Color: White
- Size: 88*38*23 mm


    What is Sonoff-Tasmota?

    Sonoff-Tasmota is an lternative open source firmware for ESP8266 based devices such as iTead SonoffAllterco Shelly and many, many more.

    It provides local control, new features and easy integration with home automation systems.

    You may find more information on github

    Initial configuration of the RF 433MHz to WIFI Bridge
    1. Power up the RF Bridge. The RF Bridge will create a WIFI access point with the name sonoff-xxx, where xxx is some number
    2. On your computer, change your wifi network to sonoff-xxxx and browse to
    3. Enter the details of your WIFI network and click save.
    4. The RF Bridge will restart and get an IP address from your networks DHCP server.
    5. On your computer, change your wifi network back to your wifi network
    6. Browse to the IP address of the RF bridge
    7. Go into "Configuration"
    8. Go into "Configure Module"
    9. Select Module Type "Sonoff Bridge 25" and press "Save". Now the RF Bridge is configured as such.
    10. To get to the main menu of the RF Bridge, browse to the IP address of the RF bridge.
    11. In "Configuration" it is now possible to specify MQTT and other parameters

    How do I configure MQTT with a Tasmota device?

    You may try the following links for more details on setting up a Tasmota device with MQTT:

    How do I configure a Tasmota devices with Home Assistant

    hello, I got your sonoff basic with tasmota. How can I rest it to factory defaults ? thank you Nicola


    On delivery it is already in factory reset state.

    If you want to factory reset afterwords, check this link Tasmota Button Usage

    Long press

    When held continuously for 40 seconds (Configurable with SetOption32, value is 10x the configured hold time) Tasmota will reset to firmware defaults and restart.