Sonoff S20 enchufe de la UE Type F MQTT Interruptor con Tasmota Firmware

N3-9T07-CE1F

New product

Sonoff S20 enchufe de la UE Type F MQTT Interruptor con Tasmota Firmware

More details

This product is no longer in stock

26,99 € tax incl.

Data sheet

Voltage 90-250V (50/60Hz)
Maximum current 10A
Maximum watt 2200W
Plug type F (EU)
Software Sonoff-Tasmota
Operating temperature 0℃-70℃
Enclosure Material Fire-retardant ABS V0
Color White
Size 103mm*63mmÇ30mm
Weight 90g

More info

Sonoff S20 enchufe de la UE Type F MQTT Switch con Tasmota Firmware.

This product is based on the Sonoff S20 but has an alternative software. EweLink is NOT supported.

Specifications

- Voltage: 90-250V (50/60Hz)
- Maximum current: 160
- Maximum watt: 2200W
- WIFI standared: 802.11b/g/n
- WIFI security: WPA-PSK/WPA2-PSK
- Enclosure material: Fire-retardant ABS V0
- Operating temperature: 0-40℃
- Software: Tasmota
- Color: White
- Size: 114*78*68 mm
- Weight: 141g

Faqs

    What is Sonoff-Tasmota?

    Sonoff-Tasmota is an lternative open source firmware for ESP8266 based devices such as iTead SonoffAllterco Shelly and many, many more.

    It provides local control, new features and easy integration with home automation systems.

    You may find more information on github


    Initial configuration of the RF 433MHz to WIFI Bridge
    1. Power up the RF Bridge. The RF Bridge will create a WIFI access point with the name sonoff-xxx, where xxx is some number
    2. On your computer, change your wifi network to sonoff-xxxx and browse to http://192.168.4.1
    3. Enter the details of your WIFI network and click save.
    4. The RF Bridge will restart and get an IP address from your networks DHCP server.
    5. On your computer, change your wifi network back to your wifi network
    6. Browse to the IP address of the RF bridge
    7. Go into "Configuration"
    8. Go into "Configure Module"
    9. Select Module Type "Sonoff Bridge 25" and press "Save". Now the RF Bridge is configured as such.
    10. To get to the main menu of the RF Bridge, browse to the IP address of the RF bridge.
    11. In "Configuration" it is now possible to specify MQTT and other parameters


    How do I configure MQTT with a Tasmota device?

    You may try the following links for more details on setting up a Tasmota device with MQTT:


    How do I configure a Tasmota devices with Home Assistant