Tasmota MQTT WIFI Lampadina RGB+White LED E27 7W
Attenzione: Ultimi articoli in magazzino!
The bulb is programmed with Tasmota firmware and shall be configured as the AiLight device.
The main protocol for control is MQTT.
In the WEB UI it is possible to toggle the light on/off. To specify colors and brightness MQTT is required.
It is compatible with many Smart Home solutions such as openhab, home assistant, and domoticz.
- Socket: E27
- Voltage: 110-240V
- Watt: 7
- Lumen: 580
- Color Temperature: Multicolor RGB+W
- Dimmable: Yes
- Material: Aluminum+plastic
- Light Angle: 180°
- Life time: 30000hours
- Size: 62*120 mm
- Wifi: 2.4 GHz
- Certification: CE, FCC, ROHS
It provides local control, MQTT and integration with home automation systems such as openHAB, Home Assistant and Domoticz.
You may find more information on the official GitHub page
If you are starting out and wish to have a relatively easy experience in developing your projects, then try the build-in web interface.
Example of Tasmota Web Interface
the Sonoff 4 Channel Pro MQTT Switch
For the temperature/humidity monitor, you also need to specify the sensor type, e.g. AM2301.
You use the Tasmota WEB UI for configuration. Enable MQTT in "Configuration/Other" and then specify your setup in "Configuration/MQTT".
For more details see also https://github.com/arendst/Sonoff-Tasmota/wiki/MQTT
There is a description of the integration with Home Assistant on the Tasmota site.
DrZzz has made some tutorials, which may be helpful (but skip the parts about flashing Tasmota).
General setup for tasmota is described at https://www.youtube.com/watch?v=c2IUIUnxjUY&t=859s
For the RF Bridge there are some more specific instructions at https://www.youtube.com/watch?v=Ega4U1KRlso
The Smart Bulb is compatible with the "AiLight" 27 module.
The installation is done as for any other Tasmota device. However you need to be extremely careful when setting up the Wifi network, since there are no button to do a factory reset. Wrong SSID or password and the bulb is bricked!
For installation follow the standard procedure.